Right TSSPRO Sealant for Each Surface

TSSPRO Sealants manufactures professional-grade sealants that protect stone, concrete, brick, grout, and tile surfaces from water, stains, UV damage, and weathering. As a contractor, knowing which surfaces should be sealed—and what product to use—can save your clients money and protect your reputation.

Whether you’re working on a flagstone patio, a limestone pool deck, or a driveway exposed to the Texas heat, sealing is the one step that makes your hard work last. Skip it, and you’re setting the job up for early failure. But with the right sealer? You lock in that fresh, clean finish and extend the life of the surface by years.

Why Sealing Matters for Contractors

When surfaces aren’t sealed, they absorb water, dirt, oil, and grime. Over time, this leads to:

• Cracks and flaking

• Discoloration and mildew

• Expensive repairs or replacements

As a contractor, you’re often the first and only line of defense. Your customer may not know what sealant to use—or that they even need one. But if you do, and you recommend the right product, you become the expert they trust.

Common Surfaces That Should Always Be Sealed

Let’s break it down by material and match it with the right TSSPRO product:

1. Natural Stone Patios, Walkways, and Pool Decks

Best product: TSSPRO 300 or TSSPRO 400

• TSSPRO 300 for a natural matte finish with high water resistance

• TSSPRO 400 for a wet-look finish with slip resistance

2. Grout and Tile (Indoor and Outdoor)

Best product: TSSPRO 550

• Keeps grout from staining and cracking

• Safe for indoor floors, showers, and outdoor tile areas

3. Concrete Driveways and Garage Floors

Best product: TSSPRO 250 or TSSPRO 750

• TSSPRO 250 is moisture-tolerant and protects against oil and tire marks

• TSSPRO 750 adds chemical resistance and is great for commercial spaces

4. Brick Walls, Fireplaces, and Walkways

Best product: TSSPRO 100WB or TSSPRO 600

• TSSPRO 100WB offers deep water resistance without changing appearance

• TSSPRO 600 gives added mold resistance in wet climates

What Happens When You Don’t Seal?

• Mold and algae build up on pool areas

• Patio pavers shift or crack from freeze-thaw cycles

• Grout lines absorb moisture and fall apart

• Beautiful flagstone turns dull, patchy, and discolored

You’ve seen it before. It costs the customer more—and if it’s your work, it may cost you in callbacks or bad reviews.

FAQ: Contractor Questions About Surface Sealing

Q1: How long do TSSPRO sealants typically last?
A: Most TSSPRO sealants last between 3 to 5 years depending on exposure and foot traffic. Some surfaces may need touch-ups sooner in high-wear areas like pool decks or driveways.

Q2: Can TSSPRO sealants be applied to damp surfaces?
A: Yes, products like TSSPRO 150, 250, and 450 are moisture-tolerant and designed to be applied even if the surface is slightly damp. This makes them ideal for pool decks and shady areas.

Q3: Will a wet-look sealer make the surface slippery?
A: TSSPRO 400 is formulated with slip-resistant properties, making it safe for pool areas and walkways while still enhancing color.

Q4: Do I need to clean the surface before sealing?
A: Always. Cleaning removes dirt, oils, and mildew so the sealer can bond properly. TSSPRO also recommends waiting for the surface to dry unless using a moisture-tolerant formula.

he Takeaway

TSSPRO Sealants makes high-performance sealers designed to protect the most common surfaces contractors work with—stone, grout, tile, concrete, and brick. Each product is built to match the job, the material, and the finish you want to deliver.

So when you finish a beautiful patio, driveway, or pool deck, don’t just walk away—seal it right. Your client gets longer-lasting results, and you get fewer callbacks and more referrals.

Need help picking the perfect product for your next job? Call TSSPRO and get expert advice straight from the source.