Order TSS Pro Sealants’ popular wet look stone sealer from our online store today. As a boutique mixer, we pride ourselves on having one of the most diverse sealant product selections of any brand. Browse through our products in our online store today and order what you need to complete your stone surface project today.
There’s something about the look and feel of stone surfaces that can complete any outdoor area. Perhaps it’s how it seamlessly blends in with the surroundings or how they add a sense of permanence to any space. Whatever the reason, protecting these stone surfaces can protect that touch of class that it adds to your home for longer.
The best way to protect these exterior surfaces is with stone sealant. There are many types of stone sealants on the market, each with its advantages and drawbacks. Some stone sealants are designed for specific types of stone, while others can be used on a variety.
Among them, wet-look sealants are the type of sealant that creates a glossy, wet-looking finish on concrete and other surfaces. They’re typically made of polymer or acrylic resin and can be applied to exterior surfaces. Wet-look sealants are often used on driveways, patios, and walkways to create a slip-resistant surface that’s easy to clean.
All of TSS Pro Sealants’ products are available in our online store. Check out our extensive selection today and find the wet-look stone sealer that can add the finishing touches to your stone surface.
Our Popular Wet Look Stone Sealer: The TSSPro 300
Add a fine shine to your stone surfaces with a wet look stone sealer and enhance their natural colors. We highly recommend the TSSPro 300 from our list of premium products. This sealant is one of our best-selling stone sealers and gives a rich, low sheen, wet-look layer to the stone surface. Beneath the low sheen surface is a protective, water-resistant shield.
This sealer is basically two sealers in one, and it’s the only sealant of its kind. It works best on pavers, masonry, brick, slate, tile, concrete, decorative landscaping, and several other surfaces. It’s resistant to most types of staining, including those from wine, coffee, and condiments. Not to mention, it helps prevent water and oil from penetrating your stone surfaces.
Applying this sealant with a brush, roller, pump-up sprayer, or airless sprayer is easy. Of those choices, we recommend using a pump-up sprayer for optimal results. The TSSPro 300 is a fast-acting, rapid drying sealant that’s ready for foot traffic in an hour and vehicle traffic in two.
Other benefits of our TSSPro 300 include the following:
- Fade resistance
- Exceptional Long-Lasting Effects
- Low Sheen, Wet Look Finish that Enhances Stones’ Natural Color
- Resistant Against Extreme Weather & UV Rays
Of course, if you are looking for a wet-look sealer that provides the stone surface with a brighter sheen, we have other wet-look stone sealers in our store. One of them is the TSSPro 400.
The TSSPro 400: Brighten & Protect Your Stone Surfaces
The TSSPro 400 is the perfect choice of sealant for driveway and sidewalk pavers because it’s resistant to stains from vehicle fluid, like oil and other motor chemicals, and efflorescence. Unlike the TSSPro 300, which only enhances the stones’ natural colors, the TSSPro 400 brings out the rich colors of substrates in the stone. It can be used to protect stone patios, concrete walkways & driveways, pavers, decorative landscaping, parking lots, etc.
Benefits of this sealant include the following:
- Resilient & Long-Lasting Protection
- Can Be Resealed without Stripping
- Microporous, allowing for the surface to “breathe”
- Resistant Against Extreme Weather
- Superior Glossy Finish
It has a simple application process, and you can use a roller, brush, or commercial sprayer. Like most of our other products, the TSSPro 400 will rapidly dry after proper application. Usually, the protected stone surface will be ready for foot traffic after an hour and vehicular traffic after two.
If you’re ordering the TSSPro 400, don’t forget to check out our TSSPro Slip Resistant Gripping Additive. This product is a special blend of sand and grit to be used with the TSSPro 400. As a side note, you must order a minimum of five bottles of the additive.
The Advantages of Nano Cross-linking Technology
Our sealants can do what others can’t. If you’re a DIYer or contractor, you’ve probably used other brands from big-box stores. Most of those products tend to not last very long, or they cure yellow, ruining the stone’s natural color. That’s why TSS Pro Sealants decided to bring change to the choices available.
All of our products use nano cross-linking technology, which works on the molecular level, allowing the sealant to form a stronger bond with the stone’s surface. Nano cross-linking technology is a process that’s used to join two pieces of materials together, which is our sealant and the stone surface, in this case. This process allows the two materials to bond together, creating a stronger, more resistant protective layer.
The available sealants in our online store use more active ingredients than most other sealants, allowing them to last longer and provide better protection. It also better brings out the stone surfaces’ natural qualities, bringing out their inner brightness. We have one of the most diverse selections for any one brand, so choose TSS Pro Sealants today.
Order What You Need from TSS Pro Sealants
Both the TSSPro 300 and TSSPro 400 are available in our online store. Order the quantity and volume you need for your stone sealing project today. Our products ship quickly and typically are shipped within 48 hours.
Whether you’re looking to add a wet look or a matte finish to your stone surfaces, we have the stone sealants for you. Check out our wet look stone sealer selection today and order from TSS Pro Sealants’ online store.