Flagstone

TSSPRO SEALANT PRODUCTS FOR FLAGSTONE

FLAGSTONE: Flagstone is the general term used to refer to a number of sedimentary and metamorphic rocks. These types of stone are called flagstone because they tend to split easily into flat segments that can be used to pave walkways. When someone refers to a rock as “flagstone,” they are not referring to the stone’s proper name, only to its suitability for use as a paving tone.  Flagstone is generally of medium porosity but varies and comes in a variety of colors. Flagstone will look better and last longer if sealed.

Considerations for choosing a sealer: color enhancing/color change, adding a wet look, minimizing cooking area stains, salt-water erosion resistance, efflorescence resistance, preventing oil (cooking/motor) stains, preventing discoloring mold/algae, preventing deterioration/flaking, adding slip resistance, VOC compliance for requiring states (water base sealers are VOC compliant), moisture content of the substrate, general stain resistance and general protection

All of the sealers listed below can be used depending on the sealer feature desired.  

• TSS100WB-Natural Stone Seal, water based, penetrating; repels water, prevents efflorescence, strong beading, natural look although may slightly darken some stone, best for non-porous stone.
• TSS150-NEW-StoneSealPro, water based, both surface film and penetrating sealer, can be applied to high moisture content substrates, repels water and many stains, slightly darkens, natural matte finish, leaves non-stick surface that easily cleans with wind or water
• TSS200-Porus Pro; solvent based, penetrating, repels water, high performance, strong beading, can darken/enhance, prevents salt-water erosion, self-cleaning; leaves, grass etc., tend blow/wash off, formulated for porous substrates.
• TSS300-Wetlook Low Sheen, solvent based, surface film with penetrating silicone; repels water, oil, wine, many stain types, darkens, enhances colors, wet look, low sheen.  Can add slip grip to reduce slippage.
• TSS500-Enhancer, water based, penetrating; repels water, strong beading, prevents efflorescence, enhancing wet look, matte finish – slight to moderate darkening
• TSS600-Stabilizng Sealer, water base, penetrating, high performance, strong beading, strengthens substrates, may slightly darken/enhance, prevents salt-water erosion
• TSS950-Stain Safe, water based, penetrating; good stain resistance, repels water and oil, many nature stains (leaves etc.) caused by oils, repels red wine stains and similar stains when cleaned soon after spill, strong beading, slight darkening

You may also want to consider:

• TSS400-Wetlook Gloss, Solvent based, film forming, high performance, high solids, darkens – enhances, gloss, wet look, repels water, oil, wine, etc., 
• TSS550-Stain Safe, solvent based, penetrating, repels water, oil, powerful, premium stain resistance for long periods including red wine, strong beading, slight darkening
• TSS750-Algae Cure, water based, surface film; repels water, prevents most forms/colors of algae, up to 2-3 year effectiveness
• TSSG100-Anti Slip Grip, textured, polypropylene particles added to film forming sealants (TSS300 & 400) that reduce slippage especially when surfaces are wet.